Comes W/ 5 Diamond Bits 1 Emery Rod 6 Sand
Press button to lock shaft, loosen the collet nut. Insert the bit, and tighten the collet securely.
1 Pen Shape electric Nail Drill for Nail Art Manicure & Pedicure Nail Polisher
Electric Nail Art File Drilling Hand-piece Machine
Comes with 6 Bits (5 diamond bits, 1 emery rod with 6 sanding bands) and Cord
COMES WITH AC Power CORD
To Get the Drill Bits In push down and hold the silver button then turn the end where the bit goes in then put the bit it then turn it back the other way to lock it now you can let go of the button
100% Brand new Electric Nail Art Drill
Variable speed control: 3,000 RPM up to 20,000 RPM
Handpiece can directly connected to electricity, easy to carry around!
Light-weight design for precise operation!
Quiet and smooth
Suitable for pedicure and manicure
The nail file can be used for natural nails as well as artificial nails
For professional studio use or home use
Voltage: 110V - 240V
Size: 6.2" INCHES 16cm (L) x 2.4cm (Diameter of handpiece)
Plug in the electric cord to the main electric outlet
Select the desired speed by turning the variable speed control knob on the handpiece
To secure the bits: push in the desired bit firmly into the hole
To remove the bits: turn off the machine and gently pull the bit out.
can be used for many other things like wood, sanding ect!!
You press the silver button. Rotate the drill head counterclockwise, this will open up the drills socket so you can put the bit in, you"ll be able to see the socket expand as you rotate counter-clockwise. Still pressing the silver button, stick in the bit. Still pressing the silver button rotate the drills head clockwise until the bit locks in place every clockwise turn closes and tightens the socket. Now you can stop pressing the silver button and you are all set to work on your nails3/32
Do not use near or place in water. If motor falls into water, unplug immediately.do not reach into water
Do not touch the bit after use. The bit is too hot to be touched by bare hands
Keep dust out of eyes and lungs by using protective eye-wear or a dust mask
Always unplug it after use
When the machine is not in use, all tool must be stored in a dry location and keep away from children.
Always unplug the tool when you change accessory
please do not use near children since device heats up when in use. Make sure that you have a nonheat surface to put it on when cooling